Soluforce Classic
Soluforce Classic is designed for medium pressure applications such as oil flowlines, water flowlines and water injection lines.
Operating pressures can go up to 90 bar (1300 psi) for water applications in the 4” pipe dimension, and 72 bar (1050 psi) for the 5” pipe.
Soluforce Classic can also be used for dry gas up to 42 bars (610 psi).
 |
| General
data Soluforce Classic |
||
| Soluforce type | M480 | M570 |
| Inner liner | PE 100 black | PE 100 black |
| Reinforcing material | Synthetic fiber | Synthetic fiber |
| Outer cover | Highly UV-stabilised white PE 100 | Highly UV-stabilised white PE 100 |
| Inside diameter / Bore | 100 mm / 4'' | 125 mm / 5'' |
| Outside diameter | 125 mm / 5'' | 150 mm / 6'' |
| Weight kg/m | 4.6 kg/m / 3.1 lb/ft | 5.9 kg/m / 4.0 lb/ft |
| Coil length | 400 m / 1312 ft | 400 m / 1312 ft |
 Gas
transport and distribution |
||
| Soluforce type | M480 | M570 |
| LCL-value (65°C/150°F)1 | 105 bar / 1525 psi | 84 bar / 1220 psi |
| Maximum gas service temperature2 | 20°C / 68°F | 20°C / 68°F |
| Maximum Service Pressure (dry gas)3 | 42 bar / 610 psi | 42 bar / 610 psi |
| Maximum hydrotest pressure4 | 84 bar / 1220 psi | 84 bar / 1220 psi |
| Gas Capacity5 | 5660 Sm3/hr / 4.8 MMScftd | 10260 Sm2/hr / 8.7 MMScftd |
| Pipe connections6 | In-line coupler | In-line coupler |
| Steel pipe interface7 | Steel welding stub | Steel welding stub |
 Hydrocarbons
production service |
||
| Soluforce type | M480 | M570 |
| LCL-value (65°C/150°F)8 | 111 bar / 1610 psi | 89 bar / 1280 psi |
| Maximum ffluid service temperature9 | 65°C / 150°F | 65°C /150°F |
| Maximum Serfice Pressure10 | 65 bar / 945 psi | 52 bar / 754 psi |
| Maximum peak pressure11 | 88 bar / 1276 psi | 70 bar / 1015 psi |
| Maximum hydrotest pressure12 | 123 bar / 1780 psi | 100 bar / 1450 psi |
| Liquid capacity13 | 57 m3/hr / 8600 bpd | 88 m3/hr / 13000 bpd |
| Pipe connections14 | In-line coupler • End-fitting | In-line coupler • End-fitting |
| Hook-up connection15 | ANSI 6'' 600 pound | ANSI 6'' 600 pound |
 Water
service |
||
| Soluforce type | M480 | M570 |
| LCL-value (65°C/150°F)8 | 111 bar / 1610 psi | 89 bar / 1280 psi |
| Maximum fluid service temperature9 | 65°C / 150°F | 65°C / 150°F |
| Maximum Service Pressure10 | 90 bar / 1300 psi | 72 bar / 1050 psi |
| Maximum peak pressure11 | 123 bar / 1780 psi | 100 bar / 1450 psi |
| Maximum hydrotest pressure12 | 123 bar / 1780 psi | 100 bar / 1450 psi |
| Liquid capacity13 | 57 m3/hr / 8600 bpd | 88 m3/hr / 13000 bpd |
| Pipe connections14 | In-line coupler • End-fitting | In-line coupler • End-fitting |
| Hook-up
connection15
|
ANSI
6'' 600 pound
|
ANSI
6'' 600 pound
|
1. 97.5% lower confidence limit at 65°C for 50 years according to ISO 9080 & ASTM 2992. 2. In normal situations gas transport and distribution takes place at temperatures below 20°C / 68°F (Buried in Soil). 3. Long term maximum service pressure. Value for 50 years lifecycle time at 20°C / 68°F. 4. Maximum allowed hydrotest pressure using water or dry gas. 5. Approximation of Natural gas capacity for a 20 km pipeline with MSP pressure at compression station and 20% pressure loss over the pipeline. 6. Connection by butt-welding of the liner pipe and then covered with an electrofused sleeve coupler. 7. Electrofused end-fitting sleeve with steel 316L pipe welding stub. 8. 97.5% lower confidence limit at 65°C for 20 years according to ISO 9080 & ASTM 2992. 9. Soluforce® pipe is not heated by the sun. The max. service temperature is the true fluid temperature or ambient temperature. 10. Long term maximum service pressure, higher peak pressures are allowed. Value for 20 years lifecycle time at 65°C / 150°F. 11. Maximum allowed peak pressure during short time i.e. well head shut-in pressure. This pressure does not effect the lifecycle time of 20 years. 12. Maximum allowed hydrotest pressure using water. 13. Approximation of liquid capacity at a liquid speed of 2 m/s / 6.6 ft/s. 14. Connection by butt-welding of the liner pipe and then covered with an electrofused sleeve coupler. End-fitting connection by an electrofusion sleeve and steel flange. 15. Electrofused end-fitting sleeve with steel 316L raised face ANSI 6” 600 pound dimensioned flange.
